Call Us: 0757-29363805Email: admin@pulisonic.com
PLC Controls Multiple Ultrasonic Power Supplies 8KW For Automatic Cleaning Assembly Line Generator Drive Box
2023041020065441 - PLC Controls Multiple Ultrasonic Power Supplies 8KW For Automatic Cleaning Assembly Line Generator Drive Box
2023041020065274 - PLC Controls Multiple Ultrasonic Power Supplies 8KW For Automatic Cleaning Assembly Line Generator Drive Box
1/5
<< /span>
>

PLC Controls Multiple Ultrasonic Power Supplies 8KW For Automatic Cleaning Assembly Line Generator Drive Box

​ Working instruction of ultrasonic power supply: frequency regulation: the ultrasonic generator can display the generated signal frequency, and an adjustable frequency potentiometer is set inside. Power adjustment: The power of the ultrasonic generator can be adjusted. External port: It can be remotely controlled b…

PLC Controls Multiple Ultrasonic Power Supplies 8KW For Automatic Cleaning Assembly Line Generator Drive Box

Working instruction of ultrasonic power supply: frequency regulation: the ultrasonic generator can display the generated signal frequency, and an adjustable frequency potentiometer is set inside. Power adjustment: The power of the ultrasonic generator can be adjusted.

External port: It can be remotely controlled by an external PLC to start and stop ultrasonic work. Debugging and matching: Normally, all ultrasonic generators have been debugged and matched according to the required power before leaving the factory. However, according to the actual usage, the mechanical model may not meet the requirements of the system β Primordial umbrella

User Information:

1、 Working voltage: The power cord of the ultrasonic generator is a standard three pin plug, with an AC voltage of 220V+10% when powered on. The power voltage needs to be stable.

2、 Ultrasonic frequency: The output frequency of the ultrasonic generator needs to be within the frequency range of the ultrasonic oscillator, which is 1.5 khz. Adjusting the bias frequency can easily cause faults (oscillator damage or generator failure).

3、 Power matching: The maximum driving power of the ultrasonic generator is around the total power of the ultrasonic oscillator, for example, the 900W generator cannot drive the 2100W ultrasonic oscillator.

4、 Working environment: The tail of the generator is a cooling fan, and the right side is a cooling window. When using it, it should be placed 15cm away from the tail and right side without obstacles. The environment should not be damp, the temperature should be appropriate, and the ventilation and heat dissipation should be good.

PLC Controls Multiple Ultrasonic Power Supplies 8KW For Automatic Cleaning Assembly Line Generator Drive Box

标签:,

Send Inquiry