20khz 2600W Industrial Ultrasonic Assisted Extraction Ultrasonic Dispersion With Wave Generator

20khz 2600W Industrial Ultrasonic Assisted Extraction Ultrasonic Dispersion With Wave Generator

Introduction to the vibrating rod of ultrasonic cleaning machine:

Ultrasonic wave refers to the electromagnetic wave with a frequency of about 20 kHz – 50 MHz. It is a mechanical wave that needs an energy carrier medium to propagate. During the transmission process of ultrasound, there is a period of alternating positive and negative pressure, which compresses the medium molecules during the positive phase, increasing the original density of the medium; When the phase is negative, the molecules in the medium are sparse and discrete, resulting in a decrease in the density of the medium. That is to say, ultrasound does not polarize the molecules in the sample, but rather generates acoustic cavitation between the solvent and the sample, leading to the formation, growth, and explosive compression of bubbles in the solution, thereby dispersing the solid sample, increasing the contact area between the sample and the extraction solvent, and improving the mass transfer rate of the target substance from the solid phase to the liquid phase. In industrial applications, the use of ultrasound for cleaning, drying, sterilization, atomization, and non-destructive testing is a very mature and widely used technology.

The ultrasonic vibration rod generates radial vibration on the rod body through high-power and high-amplitude transducers, and generates ultrasonic waves uniformly 360 ° near the vibration rod. Its amplitude is between the ultrasonic cleaning machine and the processor, so the direction of use is relatively flexible. The ultrasonic vibration rod can be used for any cleaning with a groove, and can be placed anywhere in the cleaning groove, occupying a small volume space and can be very flexible to use. Used inside the reactor, it can be used to accelerate dissolution, accelerate reaction, and prevent scaling on the inner wall.

Features of the vibrating rod function of the ultrasonic cleaning machine:

1. The stronger the ultrasonic power density, the more liquid that cannot be processed with low power density can be processed;
2. Multiple frequencies available for selection, solving every problem in various industries;
3. The material is made of national standard 304 stainless steel with a thickness of 1.0mm, which is sturdy, durable, and high-temperature resistant;
4. Korean imported standard 60W industrial grade shock absorber, with concentrated force and significant cleaning effects;
5. Can work continuously for a long time without interruption;
6. Equipped with generator control system, flexible operation * *;
7. Cleaning, emulsification, separation, homogenization, extraction, catalysis, defoaming, stirring, etc;
8. The power output of the ultrasonic vibration rod is not affected by load changes such as liquid level, tank capacity, and temperature difference, and the power output is stable and uniform.
9. Ultrasonic cavitation is generated around the shock rod, and ultrasonic energy is evenly distributed around the rod;
10. Ultrasonic vibration rod sealed and waterproof, safe to use;
11. The service life of ultrasonic vibration rods is more than 1.5 times that of traditional ultrasonic vibration plates;

20khz 2600W Industrial Ultrasonic Assisted Extraction Ultrasonic Dispersion With Wave Generator

标签：20khz 2600W Industrial Ultrasonic Assisted Extraction, Ultrasonic Dispersion With Wave Generator