Handheld 1200W High Power Ultrasonic Welding Machine Small Ultrasonic Hand Welder Portable Spot Welder Equipment

Usage of hand-held ultrasonic welding machine: 1: Connect one end of the cable to the output control cable connector on the vibration generator, and the other end to the output control cable socket on the back of the electrical box, and tighten it. 2: Wipe the connection surface of the welding head clean, conne…

Send Inquiry

Chat Now

Handheld 1200W High Power Ultrasonic Welding Machine Small Ultrasonic Hand Welder Portable Spot Welder Equipment

Usage of hand-held ultrasonic welding machine:

1: Connect one end of the cable to the output control cable connector on the vibration generator, and the other end to the output control cable socket on the back of the electrical box, and tighten it.

2: Wipe the connection surface of the welding head clean, connect it to the transducer of the vibration cylinder, and tighten it with a wrench. Attention: When connecting, it is necessary to ensure that the two connecting surfaces between the welding head and the transducer match and are locked tightly. The phenomenon of connecting screws being too long or the sliding teeth being unable to lock should not be caused, otherwise the sound wave transmission may not be smooth and the machine may be damaged.

3: When loading and unloading the welding head, two wrenches must be used to clamp the welding and transducer separately. It is not allowed to lock or load only one part to avoid damage to the portable vibration cylinder.

4: After checking the installation of points 1 and 2, plug the power cord socket into the external power socket and turn the power switch. At this time, the power indicator light will light up.

5: Gently press the sound wave control switch, and you can hear the “creaking” sound from the welding head when the sound wave is transmitted to the welding head, indicating that the machine is working normally and can be put into use.

6: When there is an abnormality in the operation of the machine, do not disassemble the equipment without permission. Please notify the supplier or send the equipment to the manufacturer for inspection and repair.

Type	power （W）	Frequency	Welding time	Contains
PU-HH300W	300W	20khz,28khz,30khz,35khz,40khz	0.1-3sec	generator , transducer ,horn,head
PU-HH500W	500W	20khz,28khz,30khz	0.1-3sec	generator , transducer ,horn,head
PU-HH900W	900W	20khz,28khz,30khz	0.1-3sec	generator , transducer ,horn,head
PU-HH1000W	1000W	20khz,28khz	0.1-3sec	generator , transducer ,horn,head
PU-HH1200W	1200W	20khz,28khz	0.1-3sec	generator , transducer ,horn,head