Battery Ultrasonic Spot Welder For 18650 & Pouch Cell Al/Ni/Cu Metal Tab Foil Welding Machine
Ultrasonic wave metal spot welder: it is similar to friction welding, but different. Ultrasonic welding time is very short, and the temperature is lower than recrystallization; It is also different from pressure welding because the static pressure applied is much smaller than that of pressure welding. It is generally…
Battery Ultrasonic Spot Welder For 18650 & Pouch Cell Al/Ni/Cu Metal Tab Foil Welding Machine
Ultrasonic wave metal spot welder: it is similar to friction welding, but different. Ultrasonic welding time is very short, and the temperature is lower than recrystallization; It is also different from pressure welding because the static pressure applied is much smaller than that of pressure welding. It is generally believed that in the initial stage of the ultrasonic welding process, the oxide on the metal surface is removed by tangential vibration, and the repeated micro welding and damage process of the protruding part of the rough surface increases the contact area, at the same time, the temperature of the welding zone increases, and plastic deformation occurs at the interface of the weldment. In this way, under the action of contact pressure, solder joints are formed when they are close to the distance at which atomic gravity can act. Long welding time or excessive ultrasonic amplitude can cause a decrease in welding strength or even damage. Ultrasonic metal welding machine is an advanced high-tech equipment that converts high-frequency electrical energy into mechanical vibration energy through a transducer and acts on the workpiece, generating high-frequency friction between two workpiece surfaces until they heat up and fuse together. It can perform spot and strip welding on thin materials of conductive metals such as copper, silver, chromium, and nickel. It can be widely used for spot and strip welding of controllable silicon chip leads, fast fuse melt sockets, electrical lead terminals, lithium-ion, nickel hydrogen, nickel cadmium battery electrode lugs, etc.
Type | Power(W) | Frequency (KHz) |
PU-MSW2000W | 2000W | 20KHZ |
PU-MSW2600W | 2600W | 20KHZ |
PU-MSW3200W | 3200W | 20KHZ |
PU-MSW4000W | 4000W | 20KHZ |
PU-MSW800W | 800W | 40khz |
Battery Ultrasonic Spot Welder For 18650 & Pouch Cell Al/Ni/Cu Metal Tab Foil Welding Machine
标签:Battery Ultrasonic Spot Welder, Pouch Cell Al/Ni/Cu Metal Tab Foil Welding Machine, Ultrasonic wave metal spot welder
Send Inquiry
-
800W-4000W Lithium Battery Cap Pneumatic Ultrasonic Metal Spot Welder Welding Machine for Pouch Cell Electrode Tab/Foil
-
Ultrasonic Metal Spot Welding Machine 20KHZ 2000W Metal Welding Machine Copper And Aluminum Welding
-
20kHz 35kHz Ultrasonic Metal Sheets Spot Welder Machine For Welding Aluminum Copper Wire
-
Ultrasonic Copper Aluminum Metal Wire Harness Terminal Welding Machine for New Energy Wiring Harness Equipment
-
Pneumatic Ultrasonic Metal Spot Welder Welding Machine Ultrasonic Wire Harness Welding Machine
-
Ultrasonic Wire Harness Bonding Machine Copper Wire Ultrasonic Metal Welding Machine For Aluminum Wire
-
4000W 20KHZ Ultrasonic Spot Welding Machine For Aluminum Nickel Copper And Stainless Steel Sheet Metal
-
Lithium Battery Cap Pneumatic Ultrasonic Metal Spot Welder Welding Machine For Pouch Cell Electrode Tab/Foil
-
Ultrasonic Terminals Automobile Copper Wiring Welder Metal Machinery Wire Harness Welding Equipment Ultrasonic Welding Machine
-
Ultrasonic Metal Spot Welding Machine For Copper Silver Aluminum Nickel Lithium Battery Cap Pneumatic
-
3000W 20KHZ Ultrasonic Metal Spot Welder Welding Machine For Lithium Battery Tab Welding Machine
-
Full Automatic Aluminum Sheet copper wire Ultrasonic Wire Harness Welding Machine And Power Supply Generator