3000W Plastic Industry Moulds Ultrasonic Cleaning System With Transducer Generator
Customer standard: removal of material residues and contamination Component: stainless steel injection mold Material: stainless steel Contamination before cleaning: material residue/contamination Tool 1: Separate the mold face down and place it in an ultrasonic cleaner for 40 minutes. Immediately thereaft…
3000W Plastic Industry Moulds Ultrasonic Cleaning System With Transducer Generator
Customer standard: removal of material residues and contamination
Component: stainless steel injection mold
Material: stainless steel
Contamination before cleaning: material residue/contamination
Tool 1: Separate the mold face down and place it in an ultrasonic cleaner for 40 minutes. Immediately thereafter, use deionized water to manually shake and soak in the rinsing tank. After completion, use an air source and dry paper to manually dry the mold.
Tool 2: Due to the size of the mold, only one measurement can be performed at a time. The mold is separated again and placed in an ultrasonic cleaner for cleaning. Clean each surface for one hour, after which the mold gains luster and removes plastic residue. There are uniform holes around this mold. Use H14 cleaning agent to remove plastic residue from the clogged hole. Immediately thereafter, use deionized water to manually shake and soak in the rinsing tank. After completion, use an air source and dry paper to manually dry the mold.
Tool 3: Separate and place both sides of the mold in an ultrasonic cleaner for one hour. Immediately thereafter, manually swing and rinse with deionized water in the rinse tank, and manually dry the mold using an air source and dry paper. H14 cleaning agent has removed some stains and residues, and the mold takes off its luster.
Tool 4: Put the mold including two locks into an ultrasonic cleaner for cleaning for 30 minutes, then immediately use deionized water to manually swing and rinse in the rinsing tank, and manually dry the mold using air source and dry paper. H14 cleaning agent removes stains from the tool and restores its luster.
Type | Frequency (Khz) | Power(W) | Capacity(L) |
PU-30LTT | 28KHZ,40KHZ | 1500 | 30 |
PU-50LTT | 28KHZ,40KHZ | 2500 | 50 |
PU-70LTT | 28KHZ,40KHZ | 3500 | 70 |
3000W Plastic Industry Moulds Ultrasonic Cleaning System With Transducer Generator
标签:3000W Plastic Industry Moulds Ultrasonic Cleaning System, Moulds Ultrasonic Cleaning System, Plastic Industry Moulds Ultrasonic Cleaning System
Send Inquiry
-
38L Filter PCB Circuit Car Engine Parts Mold Tool DPF Metal Oil Rust Degrease Industrial Ultrasonic Cleaners
-
Inject Mould Oil Cleaner Electrolytic Ultrasonic Metal Parts Degreasing Cleaning Machine And Power Supply Generator
-
25khz 2000W Electrolytic Ultrasonic Cleaner Of Plastic Injection Mold With Power Generator
-
1800W Injection Molds Ultrasonic Cleaner Machine From Material Rust Dust Oil Etcmaximum Mold
-
1500W 28KHZ High Frequency Electrolytic-Ultrasonic Injection Mold Cleaner And Generator Control Box
-
Remover Injection Molding Plastic Parts Ultrasonic Cleaner Ultrasonic Cleaning Machine With Transducer Generator
-
40KHZ 2500W Mould Electrolytic Ultrasonic Cleaning Machine For Injection Molds With Digital Generator
-
3000W Plastic Molds Industrial Ultrasonic Cleaning Systems And Power Supply Generator
-
28khz 500W Double Tanks Electrolytic Ultrasonic Cleaning Equipment For Mold Washing And Signal Generator
-
High Frequency Ultrasonic Mold Cleaning Machine Ultrasonic Cleaner For Ultrasonic Mold Cleaning Machine Manufacturer
-
Ultrasonic Aluminum Cleaning System Common Rail Injector Cleaning Machine With Signal Generator
-
28KHz 1500W Ultrasonic Cleaner Special for PP Melt blown Non woven Fabric Extruder Machine Molds Cleaning