2600W 20KHZ High Power Piezo Ceramic Ultrasonic Welding Transducer For Plastic Welding Machine

The ultrasonic vibrator is composed of ultrasonic transducer and ultrasonic horn. The ultrasonic transducer is a device that can convert high-frequency electric energy into mechanical energy. The ultrasonic horn is a passive device that does not generate vibration itself. It only changes the amplitude of the vibratio…

Send Inquiry

Chat Now

2600W 20KHZ High Power Piezo Ceramic Ultrasonic Welding Transducer For Plastic Welding Machine

Common faults:

The ultrasonic vibrator should be placed in a dry place to prevent moisture from affecting its normal operation. If the ultrasonic oscillator is damp, place it in the oven and set it to dry at around 100 ℃ for 2 hours, or use a hair dryer to remove moisture until the resistance value is normal; Ultrasonic oscillator debonding: After the ultrasonic oscillator debonding, the output power of the ultrasonic power supply is normal. However, due to poor connection between the oscillator and the vibration surface, the oscillator may burn out if operated for a long time. Ultrasonic oscillator debonding generally requires professional ultrasonic manufacturers to repair or replace it.

Type	Full-length(mm)	Joint Bolt(mm)	Frequency(KHz)	Resonance Impedance(Ω)	Capacity(pF)	Input Power (W)
PLS-HJHNQ152600	153	M20×1.5	15	15	13000	2600
PLS-HJHNQ152000	167	M20×1.5	15	10	9500	2000
PLS-HJHNQ202000	128	M18×1	20	10	11000	2000
PLS-HJHNQ30500	77	M10×1.5	30	5	5500	500
PLS-HJHNQ28200	92.1	M10×1	28	20	3000	200
PLS-HJHNQ28100	91	M8×1	28	25	2200	100
PLS-HJHNQ28250	94	1/2-20 UNF	28	20	4000	250
PLS-HJHNQ202000	128	1/2-20 UNF	20	10	20000	2000
PLS-HJHNQ201500	124	1/2-20 UNF	20	10	16000	1500
PLS-HJHNQ38100	66	M8×1.25	38	40	1200	100
PLS-HJHNQ38200	65	M8×1	38	14	3300	200