
25khz 2000W Electrolytic Ultrasonic Cleaner Of Plastic Injection Mold With Power Generator
◆ Process flow: electrolytic cleaning → municipal water washing → rust prevention ◆ Main components: Ultrasonic Generation system, electrolytic circuit system, circulating filtration system ◆ Working principle: use the mold or the workpiece to be cleaned as the cathode (put it into t…
25khz 2000W Electrolytic Ultrasonic Cleaner Of Plastic Injection Mold With Power Generator
◆ Process flow: electrolytic cleaning → municipal water washing → rust prevention
◆ Main components: Ultrasonic Generation system, electrolytic circuit system, circulating filtration system
◆ Working principle: use the mold or the workpiece to be cleaned as the cathode (put it into the cleaning frame), and use the standard electrode rod as the anode. Using the action of electrolytic water, oxygen is produced at the anode and hydrogen is produced at the cathode. During the operation, a large amount of hydrogen is generated on the surface of the workpiece, which makes the dirt quickly decompose and peel off from the surface of the workpiece; At the same time, the cavitation effect of ultrasound is used to make numerous small bubbles collide with the object. Conduct impact blasting on the dirt on the workpiece to make the dirt peel off automatically.
At the same time, the solution of special detergent 102C is used to make the dirt decompose rapidly through sufficient chemical reaction. In this way, even the complex parts that are difficult to clean, such as the grooves, grooves, corners, holes, holes, and undercuts inside the mold, will be cleaned clean, and the mold will show brilliant metallic luster from inside to outside.
The cleaned mould shall be washed with water and then soaked with special water-based anti-rust agent for steel. This anti-rust agent can quickly remove moisture from the mold surface and form protection on the mold surface. After drying, it can be stored or reprocessed. The re-production will not produce carbide attached to the mold.
◆ Scope of application: plastic mold, hardware mold, optical mirror mold, rubber mold, medical equipment, auto parts mold, etc
Note: various non-standard models and sizes can be customized according to customer requirements
Type | Frequency (Khz) | Power(W) | Capacity(L) |
PU-30LTT | 28KHZ,40KHZ | 1500 | 30 |
PU-50LTT | 28KHZ,40KHZ | 2500 | 50 |
PU-70LTT | 28KHZ,40KHZ | 3500 | 70 |
25khz 2000W Electrolytic Ultrasonic Cleaner Of Plastic Injection Mold With Power Generator
Send Inquiry
- 40KHZ 80L Injection Mold Ultrasonic Electrolysis Mold Cleaning Machine for Removing Polypropylene Dust Oil Dirt
- Double Tank Mold Electrolytic Ultrasonic Cleaning Machine And Frequency Generator
- Ultrasonic Cleaner for High Performance Mold and Injection Molds Ultrasonic Cleaning Tank
- 1800W Injection Molds Ultrasonic Cleaner Machine From Material Rust Dust Oil Etcmaximum Mold
- 600W 28Khz 40Khz Sonic Cleaner Engine Parts Metal Tools Injection Mold Ultrasonic Cleaner
- 2500W 40KHZ Ultrasonic System Slashes Injection Mold Cleaning Machine And Generator Control Box
- 88L DPF Injector Mold Motherboard PCB Cylinder Soaked Tank Car Engine Parts Equipment Industrial Ultrasonic Cleaner
- Plastic Injection Mold Ultrasonic Cleaning Machine For Die Molds Plastic Injection Molding Machine Tools Manufacturer
- 3000W Plastic Industry Moulds Ultrasonic Cleaning System With Transducer Generator
- 2400W 28KHZ Ultrasonic Mold & Die Cleaner Machine And Multi-Function Generator
- Multifunctional Large Commercial Customized Medical Device Needles Cleaning Mold Industrial Ultrasonic Cleaner
- Sheet Steel Mold Ultrasonic Cleaning Machine Ultrasonic Cleaner Best Ultrasonic Mould Cleaning Machine Factory And Suppliers