1KHz-500KHz Ultrasound Impedance And Frequency Analyzer For Ultrasonic Transducer Vibration Sensor Frequency Testing

Send Inquiry

Chat Now

1KHz-500KHz Ultrasound Impedance And Frequency Analyzer For Ultrasonic Transducer Vibration Sensor Frequency Testing

The measurement accuracy of the instrument within a specific frequency and impedance range. The white area shows an accuracy of 0.05% within the range of 1 Ω -1 M Ω for 1 mHz-500 kHz (with varying accuracy at high frequencies). When the measurement range is 10 m Ω and 1 G Ω, the accuracy is 0.1% and 1%. Beyond the above range, repeated measurements can also be made, but the accuracy may be around 1%. When the testing frequency is close to the power frequency, low frequency and high impedance testing is very difficult. Adequate sampling, makeup filters, and DC power supply (when using batteries) will ensure the results you obtain.

Type	PL-UIA500KHZ	PL-UIA1KHZ
Frequency Range	1KHZ-500Khz	1Khz-1Mhz
Measurement Index	All parameter, graphics	All parameter, graphics
Measurement Accuracy	< 1%	< 0.5%
Measurement Speed	10 second/piece (equivalent to 600 scan dots )	5 second/piece(equivalent to 600 scan dots )
Frequency Accuracy	±15ppm	±5ppm
Phase Resolution	0.15 degree	0.15 degree
Enviroment temperature	10-40 cº	10-40 cº
Impedance Range	1Ω～1MΩ	1Ω～1MΩ
Frequency Step	0.1Hz～any	0.1Hz～any
Application	Ultrasonic equipment testing, ultrasonic cleaning, ultrasonic welding, ultrasonic medical	Inspection production line of piezoelectric ceramic below 1MHz